Support
Technical Support and Information Inquiry

Q&A

T2C Tesla box, burning firmware using a PC

1, Install PhoenixSuit software (the software only supports Windows system)

2, After PhoenixSuit is successfully installed, click on "Firmware" "Image" in the software and select the received "IMG" format firmware.

3, In the T2C case, find the reset hole (located on the side with the product information), insert the Sim Eject Pin / paperclip (there is an on/off feeling at this time), do not release it, at this time, connect the T2C to the computer USB port using the data cable.

4, PhoenixSuit will pop up the connection prompt, whether to format, YES (you can release the paperclip now)

5, click Firmware, enter the upgrade status, the upgrade process is about 6 minutes, at 7%, it will pause for a long time (the signal light will be off during the upgrade process).

6, after the upgrade is complete, the signal light will be restored

 

Video tutorial https://youtu.be/zcg8meuj6YQ

Burning Software drive.google.com

Burning Files 1508 drive.google.com

Burning Files 1552 drive.google.com

 

1508 and 1552, respectively, represent two different versions of T2C, please use the firmware that matches the version, T2C version view method:

 


Problem not resolved? 
Submit help online

Please upload JPG, PNG, GIF image format (single image must not exceed 5M)
Submit

Subscribe

Get the latest news from Carlinkit

Service Support

Business Inquiry

 

© COPYRIGHT 2022 Huizhou Yunlian Technology Co.,Ltd. ALL RIGHTS RESERVED  | 粤ICP备2021133654号