Android USB Dongle——Autokit Version Update Instructions Step

14/04/2021

Update instructions:

1.Firstly, Prepare an USB stick which is less than 32GB (Flash drive format must be FAT32)

2.Unzip the file.

3.Put “Auto_Box_Update.img” file into the root directory of USB stick (blank).

(only the file, do not put anything else or folders)

4.Connect dongle into Car Android navigation USB port,and it will shows “Please connect to phone”.

5.Plug the USB stick into USB port of dongle, it will shows updating in the Autokit main screen, please do not power off or interrupt during updating.

6.when it shows updates successfully, please remove USB stick.

7.After upgrade is successful,device will automatically restart,it will shows “Please connect to phone”.

Note:

①Wait for 30 seconds after upgrade is successful.

②Please remove USB disk from the USB dongle firstly, then unplug the dongle.

③Finally,please now plug the product into USB port of car.

Before operation, please connect the car and machine to the APP for online upgrade. If you can’t upgrade online, try this operation again.

Before operation, please connect the car and machine to the APP for online upgrade. If you can’t upgrade online, try this operation again.

***Can only be used to upgrade the box with the version number of 2020.02.25.1536 and below***

Please download the firmware update file from here.